

Resultados: de producto(s) -
WET System is the wall covering patented by Wall&decò dedicated to damp environments and totally waterproof.
WETSystem has excellent resistance to yellowing, impact and abrasion, to domestic detergents and complies with class B s1 d0 fire reaction regulations.
It is a technical coating with a maximum thickness of 1.5 mm, consisting of a glass fibre fabric, a waterproofing primer and a transparent finishing system, which guarantees excellent water resistance, excellent resistance to cracking and excellent adhesion strength even after immersion in an alkaline environment.
It can be applied on concrete, plasterboard, plaster, PVC, glass or tile surfaces. It can therefore also be installed on existing surfaces, allowing renovation work to be carried out quickly with little construction waste.
The printing technology provides for water-based and solvent-free inks.
Material description: Technical coating specifically for wet environments (bathrooms, kitchens, gymnasiums, spas)
Composition: Printed fibreglass backing - Transparent finish and waterproofing primer.
Weight: Fibre: 290 g/m² ÷ 310 g/m² / Complete system: 740 g/m² ÷ 780 g/m²
Total thickness: Fibre: 0,5 mm / Complete system: 1,5 mm
Watertightness: No water penetration below an applied pressure of 150 kPa for 7 days
WET System is the wall covering patented by Wall&decò dedicated to damp environments and totally waterproof.
WETSystem has excellent resistance to yellowing, impact and abrasion, to domestic detergents and complies with class B s1 d0 fire reaction regulations.
It is a technical coating with a maximum thickness of 1.5 mm, consisting of a glass fibre fabric, a waterproofing primer and a transparent finishing system, which guarantees excellent water resistance, excellent resistance to cracking and excellent adhesion strength even after immersion in an alkaline environment.
It can be applied on concrete, plasterboard, plaster, PVC, glass or tile surfaces. It can therefore also be installed on existing surfaces, allowing renovation work to be carried out quickly with little construction waste.
The printing technology provides for water-based and solvent-free inks.
Material description: Technical coating specifically for wet environments (bathrooms, kitchens, gymnasiums, spas)
Composition: Printed fibreglass backing - Transparent finish and waterproofing primer.
Weight: Fibre: 290 g/m² ÷ 310 g/m² / Complete system: 740 g/m² ÷ 780 g/m²
Total thickness: Fibre: 0,5 mm / Complete system: 1,5 mm
Watertightness: No water penetration below an applied pressure of 150 kPa for 7 days
Data sheet
Specific References
check_circle
check_circle