WET System is the wall covering patented by Wall&decò dedicated to damp environments and totally waterproof. WETSystem has excellent resistance to yellowing, impact and abrasion, to domestic detergents and complies with class B s1 d0 fire reaction regulations. It is a technical coating with a maximum thickness of 1.5 mm, consisting of a glass fibre fabric, a waterproofing primer and a transparent finishing system, which guarantees excellent water resistance, excellent resistance to cracking and excellent adhesion strength even after immersion in an alkaline environment. It can be applied on concrete, plasterboard, plaster, PVC, glass or tile surfaces. It can therefore also be installed on existing surfaces, allowing renovation work to be carried out quickly with little construction waste. The printing technology provides for water-based and solvent-free inks.
Material description: Technical coating specifically for wet environments (bathrooms, kitchens, gymnasiums, spas)
Composition: Printed fibreglass backing - Transparent finish and waterproofing primer.
Total thickness: Fibre: 0,5 mm / Complete system: 1,5 mm
Watertightness: No water penetration below an applied pressure of 150 kPa for 7 days
Information
WET System is the wall covering patented by Wall&decò dedicated to damp environments and totally waterproof. WETSystem has excellent resistance to yellowing, impact and abrasion, to domestic detergents and complies with class B s1 d0 fire reaction regulations. It is a technical coating with a maximum thickness of 1.5 mm, consisting of a glass fibre fabric, a waterproofing primer and a transparent finishing system, which guarantees excellent water resistance, excellent resistance to cracking and excellent adhesion strength even after immersion in an alkaline environment. It can be applied on concrete, plasterboard, plaster, PVC, glass or tile surfaces. It can therefore also be installed on existing surfaces, allowing renovation work to be carried out quickly with little construction waste. The printing technology provides for water-based and solvent-free inks.
Material description: Technical coating specifically for wet environments (bathrooms, kitchens, gymnasiums, spas)
Composition: Printed fibreglass backing - Transparent finish and waterproofing primer.
Total thickness: Fibre: 0,5 mm / Complete system: 1,5 mm
Watertightness: No water penetration below an applied pressure of 150 kPa for 7 days
WET SYSTEM 2019
100 Items
Data sheet
DELIVERY TIME
20 working days approx.
PRODUCT TYPE
Product produced on request
Specific References
EAN13
7400002473902
close
check_circle
check_circle
Get what you love in 3 installments, 0 interest.
Receive your order now. Enjoy it and take your time to pay little by little.
* Charges will be automatically applied to the selected payment method. "Pay in 3 installments" is available with VISA, Mastercard, and AMEX. In some cases, a higher first installment may be required compared to the remaining ones. Read all T&Cs at www.scalapay.com.
